• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Jim Hills for "Journey II" being selected as Turning of the Week for May 6th, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
On a Bender
Chris Ramsey

On a Bender

Curly maple turned and carved 3 leg NE bowl 16" W x 18" D x 13" H and 1/8" wall thickness. This piece was turned at 24" wide and 10" high from fresh cut timber and was wet-sanded to 220 grit. Lacquer was applied to slow the drying while pressure was introduced to bend the bowl from 24" wide to a final width of 16" wide. The height of the turned piece went from 10" high to 13" high through the bending process. Rubber bands and clamps were used to achieve the final bent profile and form.
Thank you for the comment Bernie. I'm still playing around with bending bowls and testing the limitations.
 
@Don Wattenhofer Thank you Martin and Don. I have tried to upload a few thumbnails of progress photos but have been unsuccessful. I can't figure out how to upload a thumbnail without changing the original posted image.
 

Media information

Album
Chris Ramsey
Added by
Chris Ramsey
Date added
View count
1,754
Comment count
5
Rating
0.00 star(s) 0 ratings

Image metadata

Device
Canon Canon EOS DIGITAL REBEL XS
Aperture
ƒ/10
Focal length
34.0 mm
Exposure time
10 second(s)
ISO
100
Flash
Off, did not fire
Filename
IMG_2657-002.jpg
File size
48.8 KB
Date taken
Wed, 22 November 2017 3:20 PM
Dimensions
864px x 516px

Share this media

Back
Top