-
Congratulations to Tim Soutar winner of the May 2025 Turning Challenge (click here for details) -
Congratulations to Dave Landers for "Pod Box" being selected as Turning of the Week for June 2, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
nova ornamental turner
- Thread starter Ed Hall
- Start date
There were never really a lot of educational resources on it. A few grainy videos is what I remember. (here is one:
View: https://www.youtube.com/watch?v=qZzRtEL7n4w&ab_channel=TeknatoolFan
). There is a Facebook group on the Ornamental turner (https://www.facebook.com/groups/272005441171104/), you could ask there if anybody would get it to you.
). There is a Facebook group on the Ornamental turner (https://www.facebook.com/groups/272005441171104/), you could ask there if anybody would get it to you.
thx
will do that
will do that
There is also this video from a man in Germany who made a similar device.
View: https://youtu.be/3AHOfuIBP8I?si=qbepJa7a6zqwK9kE
By adapting some standard parts (boring head, cross slide table and rotary index head) that could be put together to do everything the JaHo device can do. Even large bowl turning could be done in addition to embellishments.
I haven't done anything similar but I can say a decent rotary table is a useful tool. I use mine mostly on the milling machine when I want to mill to certain angles.
Off the original thread topic (of course): the rotary table was also was the easiest way I found to help lay out patterns for chip carving on turnings.
JKJ
Ed,
I’ve not seen much published about this system. In the end, I think it becomes more of a gateway towards getting a rose engine.
Rich
I’ve not seen much published about this system. In the end, I think it becomes more of a gateway towards getting a rose engine.
Rich
It was a gateway to a Rose Engine for me, no doubt.
I looked at these type of things a couple of years back. I ended up cobbling this together.
It’s a small standard X Y Table from eBay for which I machined a custom Router mount. I reduced the speed on the router and I’ve made some of my own cutters using small HSS tool bits.
The overall setup obviously moves the cutter from the lathe headstock to the router and the workpiece to the headstock compared to that in the original post above. The setup worked well in tests but I’ve not got round to using it yet apart from that. These type of things work best with dense timbers which aren’t always easy to source at a good price.
It’s a small standard X Y Table from eBay for which I machined a custom Router mount. I reduced the speed on the router and I’ve made some of my own cutters using small HSS tool bits.
The overall setup obviously moves the cutter from the lathe headstock to the router and the workpiece to the headstock compared to that in the original post above. The setup worked well in tests but I’ve not got round to using it yet apart from that. These type of things work best with dense timbers which aren’t always easy to source at a good price.