• We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks!
  • Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Oneway Vacuum Chuck Adaptor

Status
Not open for further replies.
M

Matthew Kraft

Joined
May 5, 2019
Messages
21
Likes
2
Location
Bloomington, Illinois
Oneway Vacuum Chuck Adaptor. Screws into outboard side of headstock allowing a vacuum to be drawn through it, while preventing the hose from spinning with the spindle (vacuum pump and chuck required and not included). Uses the same Taper-Lock Adaptor as Oneway Stronghold chucks, so you can easily change to different size if needed simply by changing the adapter. Included is the adapter that fits the Oneway 1224 lathe (¾” - 16tpi RH). Works fine. $50 plus shipping. Located in Central Illinois.
HandKraftedbyMatthew@gmail.com

-SOLD-
 
Last edited:
M

Matthew Kraft

Joined
May 5, 2019
Messages
21
Likes
2
Location
Bloomington, Illinois
Matthew Kraft said:
Oneway Vacuum Chuck Adaptor. Screws into outboard side of headstock allowing a vacuum to be drawn through it, while preventing the hose from spinning with the spindle (vacuum pump and chuck required and not included). Uses the same Taper-Lock Adaptor as Oneway Stronghold chucks, so you can easily change to different size if needed simply by changing the adapter. Included is the adapter that fits the Oneway 1224 lathe (¾” - 16tpi RH). Works fine. $50 plus shipping. Located in Central Illinois.
HandKraftedbyMatthew@gmail.com
Click to expand...
 
Last edited:
Status
Not open for further replies.
Back
Top