I’m using my iPad instead of phone and have not seen the center locator. It’s probably there and I’ll keep looking. Last time I used, I just placed the burn area in the correct location. Thanks Phil. Onward thru the fog.
-
December 2025 Turning Challenge: Single Tree! (click here for details) -
Congratulations to Bob Henrickson, People's Choice in the November 2025 Turning Challenge (click here for details) -
Congratulations to Guillaume Fontaine for "Old Tea Pot" being selected as Turning of the Week for December 15, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
LP1 Pro 1st test
- Thread starter Bill Blasic
- Start date
It would have been nice if the app had higher contrast colors that didn't make it nearly impossible to see with the safety glasses on.
Here's my LP1 setup for signing bowls. I've also done some embellishing with it. This is posted somewhere else as well. Since this pic was taken I picked up a $5 USB powered fan that I set on the ways blowing upward to clear the smoke,
AFAIK, the only way to control the LP1 is from the phone app. I read some hacks on controlling it from other common laser software but they were quite complex and very unlikely to work. Did something change to allow an LP1 to be computer controlled?
AFAIK, the only way to control the LP1 is from the phone app. I read some hacks on controlling it from other common laser software but they were quite complex and very unlikely to work. Did something change to allow an LP1 to be computer controlled?
Attachments
I did a screenshot the other day when I was burning some wood nametags for members. It's really tough to read text on the buttons at the bottom.
Attachments
I bought the LP2 because I wanted something faster. I plan to do a lot more than a logo. I made a box for my wife and put some pictures of our dogs on it.
Cute pups
I have the LP2 as well.
In the designer App there is a dithering option and on that menu there is an invert slider that allows you to invert the image which would eliminate the black background. The contrast is another great option to use to clean up images on wood.
Bob