What a beauty!
-
September 2025 Turning Challenge: Cindy Drozda Finial Box! (click here for details) -
Congratulations to Dave Potts, People's Choice in the August 2025 Turning Challenge (click here for details) -
Congratulations to Paul May for "Slipstream" being selected as Turning of the Week for September 8, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
What’s on your lathe?
- Thread starter Rusty Nesmith
- Start date
I don't know that I've ever turned any sycamore but that sure is pretty. There's lots of it around here and I just got a sawmill so I can see some 1/4 sawn sycamore in my future.
I don't know that I've ever turned any sycamore but that sure is pretty. There's lots of it around here and I just got a sawmill so I can see some 1/4 sawn sycamore in my future.
I got lucky, the guy had just emptied his kiln so I was pretty early. He said it goes fast.
Wife says she wants a bowl. Chucked up a piece of 11 x 5 walnut. Rounded the outside. Grabbed a small core out of it so far.
Ended up with a 9 x 4 finished piece. Walnut oil finish.
Last piece of the consignment bowls completed on the lathe with a coat of DO. That makes a total of seven for the client. Now their decision on oil, lacquer, or a combination of both for the finish.
Cherry
13" first-turned swamp white oak platter. Anchor-sealed and paper bagged, pending update in 4-6 mos
Awesome leg design Pat!
Getting closer to Christmas and I need to get the gift bowls ready for my gold, silver, and bronze friends
. Gold of course gets nice figured bowls, bronze gets nice bowls.
Had time to second turn one this morning before heading to pick up my granddaughter, thought it would be a bronze bowl but has some nice figure in it so it may go to a silver friend!
. Gold of course gets nice figured bowls, bronze gets nice bowls.Had time to second turn one this morning before heading to pick up my granddaughter, thought it would be a bronze bowl but has some nice figure in it so it may go to a silver friend
!
That's beautiful.
Cherry HF on the lathe. I ran into several rotten knots in this one and had to keep changing shape to cut them out. Hopefully finish tomorrow.
Looking good!
Working out the details of a phone amplifier with a piece of birch. No plans or details. Just winging it.
When the ground starts to shake that's probably fast enough when turning multi-axis.
Thanksgiving fast approaching and I discovered I'm nearly out of Turkeys. Making more to match this guy.
Thanksgiving fast approaching and I discovered I'm nearly out of Turkeys. Making more to match this guy.
Very Cool!
This is awesome and great timing!
I had hopes for this sassafras crotch. I guess the tree had been dead longer than I thought. It was very punky. I used about $10 worth of thin CA on it. I still have the other half, which is slightly thicker. I have soaked it in shellac. I'll probably spin it up with low expectations.
Attachments
Working on a bowl from a board project. I misguessed the ring cut spacing and now Im dealing with very thin walls but I think the bowl will survive.
Cutting across end grain in hard dry hickory. Ok on one side. Cuts clean and shiny. Other side picks up the unsupported end grain. I’m definitely standing out of the line of fire! Sorby SRG goes from sharp to not in just this much turning. Maybe I’ll get a small weed pot out of this exercise….
